FAW 6X4 16 Cubic Meters 10 Wheeler Dump Truck for Sale
Clutch
--Dry single Φ 430mm plate
--Diaphragm spring
--Hydraulic control with air assist
--Non-asbestos composite friction material
Transmission
--Shanxi Fuller 9JS135 mechanical transmission with auxiliary case, 9 forward speeds and 1 reverse (CA6DL1-28 only)
--Ratios: 1st 12.11, 2ND 8.08, 3rd 5.93, 4th 4.42, 5th 3.36, 6th 2.41, 7th 1.76, 8th 1.32, 9th 1.00, Rev. 12.66
--Shanxi Fuller 8JS118 mechanical transmission with auxiliary case, 8 forward speeds and 1 reverse (CA6DL1-26 only)
--Ratios: 1st 11.40, 2ND 7.94, 3rd 5.63, 4th 4.06, 5th 2.81, 6th 1.96, 7th 1.39, 8th 1.00, Rev. 11.35
Front axle
--Drop forged "I" beam, rear mounted tie rod
--Rated axle capacity: 7000 kg
--Integral power steering, tilt and telescopic steering column
--Suspension: Semi-elliptic multi-leaf springs with telescopic double acting shock absorbers
--8.00V-20 steel disc wheels and 11.00-20-16PR tires (Single, bias tube-type)
Rear axle
--457 cast axle, 5.286 ratio, full-floating
--Rated axle capacity: 23000 kg
--Suspension: Balance spring, semi-elliptic multi-leaf
--8.00V-20 steel disc wheels and 11.00-20-16PR tires (Dual, bias tube-type)
Brake
--Front and rear dual-circuit independent air brake system with air dryer
--Reservoirs: Four 35L steel reservoirs and one 15L steel reservoir
--Service brakes: Air actuated, drum type, brake drum inner diameter: 400mm
--Brake shoe width: Front 135mm, rear 200mm
--Parking brake: Pneumatically controlled spring brakes, operated by manually actuated valve in conjunction with quick
Release valve, acting on rear wheels
--Exhaust brake: Electrically controlled, pneumatically activated butterfly valve in exhaust pipe
Frame
--Ladder type, channel section side rails
--Cross section dimensions: 280× 90× 8mm (with 5mm inner reinforcement)
--Assembled width: 865mm in the front and rear
Body
--Dump - fully welded, latching tailgate, integral splash guards, cab shield
Electrical system
--24 Volt, negative ground system
--Battery: 6-QAW-180D, capacity: 2× 180A. H
--Combination halogen headlamps/marker lamps
--Combination stop, tail and back-up lamps with reflector
Weights (kg)
--Curb weight: 15800
--Front dual axle curb weight: 5950
--Rear dual axle curb weight: 9850
--Load capacity: 20000
Dimensions (mm)
--Overall dimensions (length × Width × Height): 10115× 2490× 2730
--Body inner dimensions (length × Width × Height): 7200× 2300× 1400
--Track (front/rear): 1944/1847
--Wheelbase: 1900+3650+1350
--Front overhang: 1375
--Back of cab to tandem axle center: 5285
--Rear axle center to end of frame: 1085
Payload Capacity (kg)13, 800
Front Axle Curb Weight (kg) (with body)4, 325
Rear Axle Curb Weight (kg) (with body)7, 875
Total Curb Weight (kg) (with body)12, 200
Front GAW (gross axle weight) (kg)7, 000
Rear GAW (kg)19, 000
| Model |
CA6DF2-26 |
CA6DF2-24 |
| Type |
6-cylinder in line, 4-stroke, water-cooled, direct injection,
turbocharged, air-to-air intercooled |
| Peak Power kW (HP) @ RPM |
192(260) @ 2300 |
177(240) @ 2300 |
| Max Torque N. m (lb. ft. ) @ RPM |
930 @ 1400 |
890 @ 1400 |
| Specific Fuel Consumption (g/kWh) |
205 |
| Bore & Stroke (mm) |
110× 125 |
| Displacement (L) |
7.127 |
| Compression Ratio |
17: 1 |
| Emissions Rating |
Euro 2 |
Euro 2 |
| Air Compressor |
380L/min @ 2300rpm |
| Lube Oil System |
Full flow oil filter, centrifugal oil filter, turbocharger oil filter |
| Starting System |
Starter: 24V 6kW
Alternator: 28V 1.5kW, with built-in regulator
Cold starting aid: grid-type pre-heater |
| Air Intake System |
Dual paper element air filter with air restriction indicator |
| Exhaust System |
Horizontal muffler with flexible pipe |
| Fuel Supply System |
One frame-mounted primary fuel filter and two engine-mounted secondary fuel filters |
| Fuel Tank Capacity |
200L |
| Cooling System |
Radiator: tube-type aluminum radiator with coolant recovery tank
Fan: Lightweight plastic with viscous type drive |
Audited Supplier 
){kind=link}
){kind=link}